How to Choose best Fish Finder| Alex Fishing Mart

best fish finder

As the name suggests, fish detectors help anglers find fish by showing an electronic representation of what’s under their boats. Fish detectors show fish and where they are found in the water column, but they also show the outline of the bottom of the lake and any vegetation that on the bottom. A wide variety of fish detectors is available to meet the diverse desires and needs of the fishermen. Here’s how to choose the best fish finder quick fish finder  that is right for you.

Instructions

•  Consider how you plan to use the fish detector because this guide the rest of the decision making process. Do you want to see the fish first? Are you interested in seeing the fish as well as a detailed view of the bottom of the lake? Do you need functions such as water temperature and speed readings?
•  Determine how much money you plan to spend. The most expensive fish sensors also include the most features and the most detailed displays. If your main interest is how deep the water is and if there is fish in the area, you can get away with a cheaper fish finder.
•  Look at different models of fish detectors in the price range you have selected. Pay attention to the size of the units. You will need to be able to install the fish detector you choose in your boat and make it work. You operate fish detectors with buttons, so make sure you can squeeze them and understand what they are doing. Many people use only the on / off button, but fish sensors can include several other keys that perform various functions.
•  Consider the resolution of each fish detector in your offer price range. Resolution is determined by the number of pixels on the fish finder screen. The higher the number of pixels, the higher the resolution. The amount of resolution is important as it tells you how detailed the fish detector screen will be. A low-resolution fish detector, for example, can not show a fish that is only a foot or two above the bottom of the lake, while a high resolution model will show the difference between the fish and the bottom of the lake.

How to Install a Humminbird Fish Finder

Humminbird is a manufacturer of depth finders and fish finders that are sold under the same name. These devices help determine what the bottom river or lake looks like, where the cover and structure are present and even show where the fish are. Dealers often offer boat owners installation, but they have the time often choose to make facilities themselves.
Instructions:
1 Select a location for the fish finder display unit. Choose a spot that allows the screen to be seen from where normally fish, such as near the bow where the drag motors are located. Brackets often allow the display unit to be rotated. If so, select a spot that allows the display can also be read on the pilot’s seat.
2 Drill holes for the mounting bracket using the drill size recommended by humminbird. Secure the bracket with the screws provided by the manufacturer. A Phillips head screwdriver will propel into the mounting screws.
3 Connect the power cables to the terminals on the back of the display unit. Refer to the fish finder manual for more details. Typically, two cables are inserted into the color-coded terminals.
4 Extend the “hot” wire to the battery, but do not connect the wire lead to the battery. Connected to the battery occurs after the installation is completed. Secure the ground wire to the grounding plate.
5 Put the wires on the edge or under the padding to hide them.
6 Hold the transducer against a mounting point in the transom. Make sure the transducer, when mounted, will not interfere with any of the moving parts of the boat. First drill the mounting holes and make sure the transducer is pointing straight down. Screw the transducer into place.
7 Place the shipping cable from the transducer to the display unit and hide along the edge or side of the boat.
8 Inspect screws that may be at or below the waterline and apply silicone sealant to screw heads to make them impervious.
9 Attach the “hot” cable to the battery. Check the display to make sure the power is on and the unit is displaying data.

Tips and Warnings

•    Many fishermen choose high resolution fish detectors when they plan to place them near where they operate their boats. For most fishers, colored fish finder screens are not necessary.
•    Even though fish finders are designed to work in a variety of weather conditions, it is never a good idea to leave them in the elements when they are not used.Consider buy an extended warranty for your fish finder.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s